1. Wash the inside and outside of the cup (cover) with a neutral detergent in warm water before use.
In order to make the cup (pot) keep warm and cold, it is recommended to add hot water or ice water for preheating or precooling. It will be better if you add ice cubes when keeping it cold.
To prevent leakage, turn the switch and lid clockwise when the cup is tilted.
2. Use Avoid falling, collision or strong impact, which will cause the deformation of the cup body and affect the efficacy of the product.
Insulation switches, lids and other accessories are made of national standard food-grade plastics. Do not lose switches, lids, gaskets and other accessories during use, so as not to affect normal use.
Avoid any form of direct heating or place at high temperature, otherwise it will cause resin deformation and discoloration, which will affect the efficacy of the product.
Do not add liquids that are prone to high pressure, such as dry ice and carbonated beverages, into the vacuum cup, and do not add liquids containing salt such as soy sauce and soup to avoid corrosion of the cup body.
When cleaning, please use neutral detergent and warm water to clean, do not use alkaline bleach, chemical rags and other cleaning agents.
After filling in perishable beverages such as milk, please drink it as soon as possible and wash it to avoid spoilage.
Do not use it for other purposes other than heat preservation and cold preservation.
3. When not in use for a long time, the inner tank should be kept fully dry.
To prevent odor or stains, wash and dry thoroughly after use.
Since the use of impure water will leave red spots similar to rust, it can be fully cleaned by soaking in warm water and diluted vinegar for 30 minutes.
Lid: Do not sterilize at high temperature to avoid deformation. After cleaning, make sure that the sealing ring is installed in good condition
